Setting up your BetterWiFi

You can set up BetterWiFi for your brsk hub in just a few simple steps and you'll be on your way to enjoying Wi-Fi signal in every corner of your home.

Step 1: Power on your booster

1. Plug in and power on the BetterWifi Booster
2. White flashing = starting up
3. Red flashing = ready to pair with your hub

** Step 2:** Place your booster near your brsk hub

** Step 3:** Press and hold WPS button on the Hub (3 seconds)

** Step 4: **Then press WPS button on the BetterWifi Booster

1. Blue flashing = pairing
2. Green solid = paired
3. White solid = ready to move
4. Amber solid = pairing failed (try again, closer)

Tip: WPS = a shortcut to connect devices without typing passwords. Only pair one BetterWifi Booster at a time.

** Step 5: **Find the optimal position

1. Unplug your booster once it shows solid white
2. Move it to your chosen location (halfway between router and dead zone works best)
3. Plug it back in and wait for the light to stabilise

** Stepy 6: **Check your connection

1. Open a browser and type: http://192.168.1.1
2. Username: admin
3. Password: Check the label underneath the Hub
4. Then go to Wi-Fi Mesh > Overview to see your signal quality (green = good!)

Tips for getting the best signal

• Place it centrally and openly visible
• Avoid hiding behind TVs or in cupboards
• Mid-shelf height is ideal
• Keep away from thick walls or large appliances

For tricky layouts or big homes, you can add a second BetterWifi Booster.